CV - Marwan Effendy

Enter a comma separated list of user names.
marwan's picture

Marwan Effendy

 ( PhD, Kingston University London, United Kingdom)

Adjunct Professor

 Email: marwan.effendy@ums.ac.id
Faculty: Institute of Strategic Science and Technology (ItSAT)
Programme: PhD in Computational Science Engineering

Indexed Articles

Displaying 16 records.
Enter a comma separated list of user names.
Publication Year Articles
2016 1
2018 1
2019 3
2020 1
2021 2
2022 2
2023 4
2024 1
2025 1
16
Enter a comma separated list of user names.
No Journal Detail Index IF
1 Effendy, M. Salim, A.A., Syawitri, T.P., Sugati, D.
(2025) Performance of liquid-gas ejector with curve diffuser in vertical flow, Results in Engineering, Vol: 104434, , 1-9, ISSN:2590-1230. (Published) 		Web of Science (SCIE) 6
2024
2 Hidayati N.; Khoiruddin W.; Purnama H.; Effendy M.
(2024) Synthesis and Characterisation of Graphene Oxide Catalysts for Glycerol Acetylation, Bulletin of Chemical Reaction Engineering and Catalysis, Vol: 19, 2, 340-349, ISSN:1978-2993 - https://doi.org/10.9767/bcrec.20146. (Published) 		Scopus
3 Kartikasari R.; Subardi A.; Muhfidin R.; Aziz I.; Effendy M.; Triyono; Diharjo K.
(2023) DEVELOPMENT OF FE-13.8CR-8.9MN ALLOY FOR STEEL BIOMATERIALS, Eastern-European Journal of Enterprise Technologies, Vol: 6, 12(126), 6-15, ISSN:1729-3774 - https://doi.org/10.15587/1729-4061.2023.293009. (Published) 		Scopus
4 Ngafwan N.; Effendy M.; Supangkat Samidjo G.; Gusti Ketut Puja I.; Wardana I.N.G.
(2023) The role of Carica papaya latex bio-catalyst and thermal shock in water on synthesizing rice husk, Arabian Journal of Chemistry, Vol: 16, 4(), 104568, ISSN:1878-5352 - https://doi.org/10.1016/j.arabjc.2023.104568. (Published) 		Web of Science (SCIE) 5.4
2023
5 Widodo Besar Riyadi T.; Effendy M.; Radiant Utomo B.; Tri Wijayanta A.
(2023) Performance of a photovoltaic-thermoelectric generator panel in combination with various solar tracking systems, Applied Thermal Engineering, Vol: 235, 121336, -, ISSN:1359-4311 - https://doi.org/10.1016/j.applthermaleng.2023.121336. (Published) 		Web of Science (SCIE) 6.1
2023
6 Al-Kayiem H.H.; Mohammed M.N.; Kelly K.; Riyadi T.W.B.; Effendy M.
(2023) Experimental Assessment and Development of Thermal Comfort Model for Implication in Tropical Climate, International Journal of Computational Methods and Experimental Measurements, Vol: 11, 1, 35-43, ISSN:2046-0546 - https://doi.org/10.18280/ijcmem.110105. (Published) 		Scopus
7 Anisa N.; Darmadi D.B.; Sugiono S.; Ngafwan N.; Effendy M.; Wardana I.N.G.
(2022) The role of Carica papaya latex bio-catalyst in recycling of used fibre pulp, Arabian Journal of Chemistry, Vol: 15, 7, 103952, ISSN:1878-5352 - https://doi.org/10.1016/j.arabjc.2022.103952. (Published) 		Web of Science (SCIE) 5.3
2023
8 Riyadi, T.W.B., Utomo, B.R., Effendy, M., Wijayanta, A.T., Al-Kayiem, H.H.
(2022) Effect of thermal cycling with various heating rates on the performance of thermoelectric modules, International Journal of Thermal Sciences, Vol: 178, , 107601, ISSN:1778-4166 - https://doi.org/10.1016/j.ijthermalsci.2022.107601. (Published) 		Web of Science (SCIE) 4.9
2023
9 Effendy M.; Surono A.; Saputra E.; Nugraha N.A.
(2021) Performance and smoke opacity of compression-ignition engine using used-waste oil, Case Studies in Thermal Engineering, Vol: 26, 101063, -, ISSN:2214-157X - https://doi.org/10.1016/j.csite.2021.101063. (Published) 		Web of Science (SCIE) 6.4
2023
10 Kartikasari R.; Effendy M.
(2021) Surface characterization of Fe-10Al-25Mn alloy for biomaterial applications, Journal of Materials Research and Technology, Vol: 15, , 409-415, ISSN:2238-7854 - https://doi.org/10.1016/j.jmrt.2021.08.006. (Published) 		Web of Science (SCIE) 6.2
2023
11 Al-Kayiem H.H.; Koh K.; Riyadi T.W.B.; Effendy M.
(2020) A comparative review on greenery ecosystems and their impacts on sustainability of building environment, Sustainability (Switzerland), Vol: 12, 20(8529), 1-26, ISSN:2071-1050 - https://doi.org/10.3390/su12208529. (Published) 		Web of Science (SCIE) 3.3
2023
12 Julianto E.; Siswanto W.A.; Effendy M.
(2019) Characteristics of temperature changes and stress of float glass under heat radiation, International Journal of Emerging Trends in Engineering Research, Vol: 7, 9, 228-233, ISSN:2347-3983 - https://doi.org/10.30534/ijeter/2019/03792019. (Published) 		Scopus
13 Effendy M.; Yao Y.F.; Yao J.; Marchant D.R.
(2019) Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles, International Journal of Heat and Fluid Flow, Vol: 80, 108487, -, ISSN:0142-727X - https://doi.org/10.1016/j.ijheatfluidflow.2019.108487. (Published) 		Web of Science (SCIE) 2.6
2023
14 Sunaryo; Efendy M.; Sarjito; Kamarrudin N.S.
(2019) Pyrolysis of plastic waste as an alternative fuels in spark ignition engine, International Journal of Emerging Trends in Engineering Research, Vol: 7, 11, 454-459, ISSN:2347-3983 - https://doi.org/10.30534/ijeter/2019/097112019. (Published) 		Scopus
15 Supriyono; Wijianto; Effendy M.; Siswanto W.A.
(2018) Elastoplastic analysis of plate with boundary element method, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 864-872, ISSN:0976-6359 - http://iaeme.com/Home/issue/IJMET?Volume=9&Issue=6. (Published) 		Scopus
16 Effendy M.; Yao Y.F.; Yao J.; Marchant D.R.
(2016) DES study of blade trailing edge cutback cooling performance with various lip thicknesses, Applied Thermal Engineering, Vol: 99, , 434-445, ISSN:1359-4311 - https://doi.org/10.1016/j.applthermaleng.2015.11.103. (Published) 		Web of Science (SCIE) 6.1
2023


Books

Displaying 3 records.
Enter a comma separated list of user names.
No Cover book Book Detail Involvement
1
RISET & PUBLIKASI ILMIAH - Strategi Menulis Artikel Riset dan Menembus Publikasi Berkelas Internasional Bereputasi
Marwan Effendy
(2023), ISBN:978-623-01-3368-8, Andi.
Language: Bahasa Indonesia
source link
First author
2
Standar Penjaminan Mutu Internal (SPMI)
Sumardjoko, B., Wajdi, F., Effendy, M., Prasetyo, H., Destya, A., Prihartanti, N., Isa, M., Wulandari, M.
(2021), ISBN:978-602-361-374-8, Muhammadiyah University Press.
Language: Bahasa Indonesia
source link
Co-author
3
Pengetahian Dasar Sistem Kendali
Marwan Effendy
(2019), ISBN:9786023612161, Muhammadiyah University Press (MUP).
Language: Bahasa Indonesia
source link
First author


Chapter in Book

Displaying 1 records.
Enter a comma separated list of user names.
No Cover book Chapter in Book Involvement
1
Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia
(Al-Kayiem H.H.; Effendy M.; Riyadi T.W.B.; Kurnia J.C.; Morganadus A.)
in
Lecture Notes in Mechanical Engineering 35-45
(
Proceedings of the 7th International Conference on Production, Energy and Reliability
)
2023, ISBN: 978-981-19-1939-8, Springer, Singapore. 		Co-author


Article in Proceedings

Displaying 20 records.
Enter a comma separated list of user names.
No Article in Proceedings Involvement
1 Pressure loss and wall heat transfer characteristics in blade trailing-edge cooling passage - Effendy M.; Yao Y.F.; Yao J. In Proc. The 7th International Symposium On Turbulence Heat and Mass Transfer, Palermo, Sicily, Italy. (2012), pp.506-517, ISBN:2377-2816.
https://doi.org/10.1615/ICHMT.2012.ProcSevIntSympTurbHeatTransfPal.560 		First author
2 Evaluation of wall heat transfer in blade trailing-edge cooling passage - Yao Y.; Effendy M.; Yao J. In Proc. The 2nd International Conference on Engineering and Technology Innovation 2012, November 2 - 6, 2012, Kaohsiung, Taiwan. - Applied Mechanics and Materials (2013), pp.738-742, ISBN:1662-7482.
https://doi.org/10.4028/www.scientific.net/AMM.284-287.738 		Co-author
3 Comparison study of turbine blade with trailing-edge cutback coolant ejection designs - Effendy M.; Yao Y.; Yao J. In Proc. The 51st AIAA Aerospace Sciences Meeting - The New Horizons Forum and Aerospace Exposition 07-10 January 2013, Grapevine (Dallas/Ft. Worth Region), Texas. (2013), pp.AIAA-2013-0548, ISBN:978-162410181-6.
https://doi.org/10.2514/6.2013-548 		First author
4 Effect of mesh topologies on wall heat transfer and pressure loss prediction of a blade coolant passage - Effendy M.; Yao Y.; Yao J. In Proc. the 3rd International Conference on Mechanical & Manufacturing Engineering 2012, November 20–21, 2012, Malaysia - Applied Mechanics and Materials (Volume 315) (2013), pp.1050, ISBN:1662-7482.
https://doi.org/10.4028/www.scientific.net/AMM.315.216 		First author
5 Predicting film cooling performance of trailing-edge cutback turbine blades by detached eddy simulation - Effendy M.; Yao Y.; Yao J.; Marchant D.R. In Proc. The 52nd Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, 13-17 January 2014, National Harbor, Maryland. (2014), pp.AIAA 2014-0279, ISBN:978-162410256-1.
https://doi.org/10.2514/6.2014-0279 		First author
6 Detached-Eddy Simulation of Trailing-Edge (TE) Cutback Turbine Blade Cooling - Effendy M.; Yao Y.; Marchant D.R. In Proc. The 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17), Langkawi, Malaysia, July 22-23, 2017. (2017), pp.MATEC Web of Conferences 135(8), ISBN:2261236X.
https://doi.org/10.1051/matecconf/201713500008 		First author
7 Supriyono; Effendy M.; Wijianto
(2018) Domain discretization in dealing with domain integral in material nonlinearity plate bending analysis with boundary element method, AIP Conference Proceedings, Vol: 1977, 20055, -, ISSN:. In Proc. The 4th International Conference on Engineering, Technology, and Industrial Application (ICETIA) 2017 (2018), pp.1977, 020055, ISBN:0094-243X.
https://doi.org/10.1063/1.5042911 		Co-author
8 Evaluation on a digitized CAD model of 3D scanner used in reverse engineering
Proceedings - Riyadi T.W.B.; Yulianto Y.H.; Effendy M.; Sarjito; Zheng Z.; Ping T.L. In Proc. 12th South East Asian Technical University Consortium (SEATUC) (2018), pp.SEATUC 2018, 8788885, ISBN:978-153865094-3.
https://doi.org/10.1109/SEATUC.2018.8788885 		Co-author
9 RANS study of the liquid jet gas ejector - Sugati D.; Effendy M. In Proc. The 3rd International Conference on Mechanical Engineering (ICOME 2017) (2018), pp.AIP Conference Proceedings, Vol: 1983, 20006, ISBN:0094-243X.
https://doi.org/10.1063/1.5046202 		Co-author
10 Material nonlinearity plate bending analysis with boundary element method - Supriyono; Effendy M.; Wijianto In Proc. The 3rd International Conference on Engineering, Technology, and Industrial Application (ICETIA 2016) (2017), pp.AIP Conference Proceedings, 2017, 1855, 30023, ISBN:0094-243X.
https://doi.org/10.1063/1.4985493 		Co-author
11 Identification performance of the liquid-gas ejector using static pressure distribution - Sugati D.; Indarto; Purnomo; Sutrisno; Effendy M.; Yawara E. In Proc. The 3rd International Conference on Mechanical Engineering (ICOME 2017) (2018), pp.AIP Conference Proceedings, 2018, 1983, 20013, ISBN:0094-243X.
https://doi.org/10.1063/1.5046209 		Co-author
12 Numerical study of pin-fin cooling on gas turbine blades - Effendy M.; Yao Y.; Sugati D.; Tjahjono T. In Proc. The 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA) (2019), pp.AIP Conference Proceedings, 2114, 60022, ISBN:0094243X.
https://doi.org/10.1063/1.5112493 		First author
13 Optimization of centrifugal pump performance with various blade numbers - Subroto; Effendy M. In Proc. The 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA) (2019), pp.AIP Conference Proceedings, 2019, 2114, 20016, ISBN:0094243X.
https://doi.org/10.1063/1.5112400 		Co-author
14 Improvement of wear resistant of railway wheel by using graphite in various speeds based on disc-on-disc contact system - Junaidi; Suparno J.; Ardiansyah D.H.; Effendy M.; Jamari In Proc. Proceedings of the 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA) 2018 (2019), pp.AIP Proceeding 2114; 020008-1–020008-8, ISBN:978-0-7354-1850-9.
https://doi.org/10.1063/1.5112392 		Co-author
15 Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade - Effendy M.; Yao Y.; Yao J.; Marchant D.R. In Proc. Proceedings of the 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA) 2018 (2019), pp.AIP Proceeding 2114; 020008-1–020008-8, ISBN:978-0-7354-1850-9.
https://doi.org/10.1063/1.5112392 		First author
16 Graphite as dry lubricant to reduce rail wheels wear level - Suparno J.; Halim D.A.; Junaidi; Setiawan A.; Effendy M.; Jamari J. In Proc. The International Conference on Engineering, Technology, and Industrial Application (ICETIA) (2019), pp.Materials Science Forum Vol: 961 126-133, ISBN:1662-9752.
https://doi.org/10.4028/www.scientific.net/MSF.961.126 		Co-author
17 An effect of different spark plug used and additional ethanol on engine performance and exhaust gas emission - Sarjito; Prasetyo I.; Riyadi T.W.B.; Anggono A.D.; Effendy M. In Proc. The 2nd International Conference on Engineering and Applied Technology 9–10 October 2018, Aceh, Indonesia (2019), pp.IOP Conference Series: Materials Science and Engineering, Vol: 674, 1(12062), ISBN:1757-8981.
https://doi.org/10.1088/1757-899X/674/1/012062 		Co-author
18 An analysis of temperature treatment of biodiesel fuel on engine performance - Rozaq F.; Wirawan W.A.; Barokah; Effendy M.; Nurtanto M. In Proc. The 4th International Conference on Vocational Education of Mechanical and Automotive Technology (ICoVEMAT) 2021 (2023), pp.AIP Conference Proceedings, Vol: 2671, 20027, ISBN:0094-243X.
https://doi.org/10.1063/5.0114486 		Co-author
19 Performance of SI engine using blended fuel from waste plastic pyrolysis - Saputra, E. & Effendy, M. In Proc. The 5th International Conference On Engineering and Applied Technology (ICEAT) (2023), pp.AIP Conference Proceedings2702, 040009 (2023), ISBN:1551-7616.
https://doi.org/10.1063/5.0154956 		Co-author
20 Enhancing heat dissipation in microchannel heat sinks: a comprehensive study on Al2O3 nanoparticle concentration and flow rate dependencies - Ngisomudin; Anggono A.D.; Effendy M.; Ngafwan In Proc. The Proceedings of The 7th Mechanical Engineering, Science and Technology International Conference (2024), pp.Vol: 63, 1(15), 1-6, ISBN:2673-4591.
https://doi.org/10.3390/engproc2024063015 		Co-author


Other Publications

Enter a comma separated list of user names.

No other publications found.

Research

Displaying 7 records.
Enter a comma separated list of user names.
Involvement Involved as
Project leader 6
Research member 1
Enter a comma separated list of user names.
No Project Title Start End Involvement Category Funding (MYR)
1 [Techno Fund 007/LL6/PB/AL.04/2024, 196.33/A.3-III/LRI/VI/2024]
Processing of plastic waste as an alternative energy substitute for diesel vehicle fuel
 1/1/2024 31/12/2024 Project leader National
2 [Techno Fund 007/LL6/PB/AL.04/2024, 196.105/A.3III/LRI/VI/2024]
Vacuum Pump Performance Improvement Using Curved Diffuser on Liquid-Gas Ejector 		1/1/2024 31/12/2024 Project leader National
3 [Techno Fund UMS-2022-01]
The Effect of Lobe Separation Angle Camshaft on Otto Engine Performance and Exhaust Gas Emissions
 1/1/2022 31/12/2022 Project leader National
4 [Techno Fund UMS-2022-02]
Effect of Piston Bowl Design on Combustion Engines on Engine Performance and Exhaust Emissions
 1/1/2022 31/12/2022 Project leader National
5 [Techno Fund UMS-2022-03]
Environmentally Friendly Bioethanol Processing Technology for Substituting Motor Vehicle Fuel
 1/1/2022 31/12/2022 Project leader National
6 [Techno Fund ITNY-2022-01]
Development of vacuum frying based on the use of renewable energy 		1/1/2022 31/12/2022 Research member National
7 [Techno Fund UMS-2021-01]
Plastic Waste Processing for Alternative Fuel in Vehicle Engines 		1/1/2021 31/12/2021 Project leader National


Innovation

Enter a comma separated list of user names.

No innovation records found.


Community Service

Displaying 2 records.
Enter a comma separated list of user names.
No Type of Community Brief Description Funding amount (MYR)
1 Educational Community Training of Welding Engineering Skills and Work Safety Procedures towards Independent Business
funded by: Universitas Muhammadiyah Surakarta (UMS)
1/7/2023 - 31/12/2023
Training of Welding Skills and Work Safety Procedures for High School Graduates
( ) 		900
2 Educational Community Soft Skills for Final Year Vocational High School Students Towards Independent Entrepreneurship in Air Conditioning Service
funded by: Universitas Muhammadiyah Surakarta (UMS)
1/1/2023 - 30/6/2023
Course and Workshop on Air Conditioning
( ) 		1,000
1,900


Consultation Service

Enter a comma separated list of user names.

No consultation records found.


Supervision

Displaying 10 records.
Enter a comma separated list of user names.
PhD or Doctor (S3)
No Supervision Student Status
1 Supervisor
Pramuko Ilmu Purboputro (D209230005)
Synthesis of Turmeric Fruit for Additives in Biodiesel Fuel
Universitas Muhammadiyah Surakarta 		In Progress
2 Supervisor
Subroto (D209230006)
Characterization of pyrolysis plastic oil from plastic waste as an alternative vehicle fuel
Universitas Muhammadiyah Surakarta 		In Progress
Master by Research (S2)
No Supervision Student Status
1 Supervisor
AMAT AGUS SALIM (U100220001 )
An Experimental Study of Liquid-Gas Ejector (LGE) as a Vacuum Pump
Universitas Muhammadiyah Surakarta 		Completed 2024
2 Co- Supervisor
BALIKOWA AMUZA (U100220004)
Synthesis of Crystalline Nano Materials from Amorphous Sugarcane Bagasse Ash
Universitas Muhammadiyah Surakarta 		Completed 2024
3 Supervisor
M. ZULYAN (U100210002)
Characterization of Pyrolysis Oil from High Density Polyethylene (HDPE) Plastic Waste
Universitas Muhammadiyah Surakarta 		Completed 2023
4 Supervisor
FERI HIDAYATULLOH (U100210004 )
An Experimental Study of Pyrolysis Oil from Polystyrene (PS)
Universitas Muhammadiyah Surakarta 		Completed 2023
5 Supervisor
Dody Bimo Aji (U100210008)
An Experimental Study of Pyrolysis Oil from PolyEthylene (PE) Plastic Waste
Universitas Muhammadiyah Surakarta 		Completed 2023
6 Supervisor
DIYAN WAHYUDI (U100200013)
Performance and Exhaust Emissions of Gasoline Engines Using Bioethanol Blends from Sugarcane Molasses
Universitas Muhammadiyah Surakarta 		Completed 2022
7 Supervisor
FADLI ROZAQ (U100190008)
Engine Performance using Biodiesel Fuel
Universitas Muhammadiyah Surakarta 		Completed 2022
8 Supervisor
ANTON PRIHATNO (U100190018)
The effect of piston surface profile shape on engine performance consumption and exhaust emissions
Universitas Muhammadiyah Surakarta 		Completed 2022


Awards

Displaying 2 results.
Enter a comma separated list of user names.
Achievement Recognition
No Achievement Information Category Year
1 The Commercialization of Science-Technology-and-Health Research 2021-2022
Universitas Muhammadiyah Surakarta 		University 2022
2
Best Presenter on the 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA 12-13 December 2018) https://icetia.ums.ac.id/2018/
 International 2018


Management

Displaying 2 records
Enter a comma separated list of user names.
Universitas Muhammadiyah Surakarta (UMS)
No Assignment Post Assignment Information
1 Vice Director - Vice Director - Post-graduate School,
(1/9/2018 - Current )
2 Head of Department - Head of Department - Mechanical Engineering,
(1/1/2008 - Date 31/8/2010)


Other Assignments

Displaying 27 records
Enter a comma separated list of user names.
Elsevier
No Assignment Description
1 Journal Reviewer International Journal of Hydrogen Energy ,
(8/5/2025 - Current )
2 Journal Reviewer Energy ,
(14/3/2025 - Current )
3 Journal Reviewer Thermal Science and Engineering Progress ,
(28/12/2024 - Current )
4 Journal Reviewer Computers & Fluids (ELSEVIER) ,
(18/12/2024 - Current )
5 Journal Reviewer Applied Thermal Engineering (ELSEVIER) ,
(3/5/2024 - Current )
6 Journal Reviewer Journal of the Taiwan Institute of Chemical Engineers ,
(22/4/2024 - Current )
7 Journal Reviewer International Journal of Thermal Sciences (ELSEVIER) ,
(4/2/2024 - Current )
8 Journal Reviewer Energy Conversion and Management: X ,
(1/1/2024 - Current )
9 Journal Reviewer Results in Engineering (ELSEVIER) ,
(8/9/2023 - Current )
10 Journal Reviewer Case Studies in Thermal Engineering (ELSEVIER) ,
(22/11/2022 - Current )
11 Journal Reviewer Applied Mathematics and Computation (ELSEVIER) ,
(13/6/2022 - Current )
12 Journal Reviewer Building and Environment (ELSEVIER) ,
(28/11/2021 - Current )
13 Journal Reviewer International Journal of Heat and Mass Transfer (ELSEVIER) ,
(11/12/2018 - Current )
Wiley
No Assignment Description
1 Journal Reviewer Energy Technology (WILEY) ,
(16/12/2024 - Current )
International Islamic University Malaysia (IIUM)
No Assignment Description
1 Conference Editor The 9th International Conference on Mechatronics Engineering (ICOM’24) IIUM Kuala Lumpur Malaysia ,
(13/8/2024 - Date 14/8/2024)
2 Conference Technical Committee The 6th International Conference on Engineering Professional Ethics and Education (ICEPEE'23 IIUM Malaysia ,
(15/8/2023 - Date 16/8/2023)
ASME
No Assignment Description
1 Journal Reviewer Journal of Turbomachinery (ASME) ,
(10/4/2024 - Current )
Universiti Teknologi Petronas Malaysia
No Assignment Description
1 Master or PhD Examiner Master - Mohammad Sobir Abdul Basith 20001259 Sem 2 2024 ,
(13/3/2024 - Date 13/5/2024)
2 Master or PhD Examiner Master - Luthfi Ady Haryoko 17006010 Sem 1 2021 ,
(7/7/2021 - Date 7/9/2021)
Springer Nature
No Assignment Description
1 Journal Reviewer Energy Systems (SPRINGER) ,
(20/12/2023 - Current )
2 Journal Reviewer Journal of Engineering and Applied Science (SPRINGER) ,
(31/5/2023 - Current )
Universitas Brawijaya Malang Indonesia
No Assignment Description
1 Master or PhD Examiner PhD - Ely Setyo Astuti 177060200111002 Sem 2 2022-2023 ,
(11/1/2023 - Date 11/1/2023)
2 Master or PhD Examiner PhD - Nurfa Anisa 157060200111003 Sem 2 2022-2023 ,
(31/5/2022 - Date 31/5/2022)
Universitas Sebelas Maret Indonesia
No Assignment Description
1 Master or PhD Examiner PhD - Purwadi Joko Widodo T761908001 Sem 1 2022-2023 ,
(14/11/2022 - Date 14/11/2022)
2 Master or PhD Examiner PhD - R Lullus Lambang G Hidayat T7620002004 Sem 2 2021-2022 ,
(7/2/2022 - Date 7/2/2022)
ASCE
No Assignment Description
1 Journal Reviewer Journal of Aerospace Engineering (ASCE) ,
(29/9/2020 - Current )
Universiti Muhammadiyah Malaysia (UMAM)
No Assignment Description
1 Conference Track Director International Summit on Knowledge Advancements ISKA 2017 Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)


Attended Courses

Displaying 8 records.
Enter a comma separated list of user names.
No Course Information Duration
1
How to Get Published in International Journals - Universitas Malaysia Perlis (UniMAP)
Kuala Perlis, 02600 Arau, Perlis
28/10/2019 - 31/10/2019
2
Best Practices Workshop for Post-graduate Supervision - Centre for Graduate Studies Universiti Tun Hussein Onn Malaysia
Parit Raja, Johor.
24/5/2017 - 25/5/2017
3
Technical Writing Skills - ELSEVIER
Netherlands
2/11/2020 -
4
Writing Skills - ELSEVIER
Netherlands
23/10/2020 -
5
Fundamentals of Manuscript Preparation - ELSEVIER
Netherlands
18/10/2020 -
6
Certified Peer Reviewer Course - ELSEVIER
Netherlands
19/10/2020 -
7
Becoming a Peer Reviewer - ELSEVIER
Netherlands
21/10/2020 -
8
Going through Peer Review - ELSEVIER
Netherlands
20/10/2020 -


Teaching Experience

Displaying 8 records
Enter a comma separated list of user names.
Employer: Universitas Muhammadiyah Surakarta (UMS)
No Degree Level Session Course
1 PhD or Doctor (S3) Sem 2 2023-2024
Writing of Scientific Publication (S3-W04)
2 PhD or Doctor (S3) Sem 1 2023-2024
Research Methodology (S3-W01)
3 Master by Course (S2) Sem 3 2015-2024
Seminar and Publication (S2-W09)
4 Master by Course (S2) Sem 2 2015-2024
Advance Engine Technology (S2-P02)
5 Master by Course (S2) Sem 1 2015-2024
Research Methodology (S2-W01)
6 Bachelor (S1) Sem 4 1997-2024
Control Systems and Automation (S1-W17)
7 Bachelor (S1) Sem 4 1997-2024
Refrigeration and Air Conditioning (S1-W24)
8 Bachelor (S1) Sem 1 1997-2024
Mechanical Vibrations (S1-W05)